colorFabb Bronzefill filament is a composite of colorFabb's own PLA/PHA polymer and fine bronze powder. With this composite it is possible to print weighty, metallic looking parts at home!
To achieve a high shine metallic finish, colorFabb recommends carefully sanding the final print with increasingly fine grit sandpaper before buffing with a soft cloth and copper polish to really make those bronze particles shine!
Printer Model | Slicer | Print Speed [mm/s] | Layer Height [mm] | Nozzle Temperature [°C] | Heated Bed Temperature [°C] | Nozzle Size [mm] | Adhesion Type | Retraction Distance [mm] | Retraction Speed [mm/s] |
---|---|---|---|---|---|---|---|---|---|
Ultimaker 2 | Cura | 50 | 0.2 | 215 | 50 | 0.4 | Glue | N/A | N/A |
Printer Model | Slicer | Print Speed [mm/s] | Layer Height [mm] | Nozzle Temperature [°C] | Heated Bed Temperature [°C] | Nozzle Size [mm] | Adhesion Type | Retraction Distance [mm] | Retraction Speed [mm/s] |
---|---|---|---|---|---|---|---|---|---|
Prusa Original Prusa i3 Plus | Cura | 30 | 0.1 | 210 | 55 | 0.4 | None | N/A | N/A |
Printer Model | Slicer | Print Speed [mm/s] | Layer Height [mm] | Nozzle Temperature [°C] | Heated Bed Temperature [°C] | Nozzle Size [mm] | Adhesion Type | Retraction Distance [mm] | Retraction Speed [mm/s] |
---|---|---|---|---|---|---|---|---|---|
Ultimaker Original | Cura | 50 | 0.2 | 220 | 40 | 0.4 | Glue | 5 | 45 |
Printer Model | Slicer | Print Speed [mm/s] | Layer Height [mm] | Nozzle Temperature [°C] | Heated Bed Temperature [°C] | Nozzle Size [mm] | Adhesion Type | Retraction Distance [mm] | Retraction Speed [mm/s] |
---|---|---|---|---|---|---|---|---|---|
Generic RepRap | Cura | 40 | 0.15 | 210 | 70 | 0.4 | HairSpray | N/A | N/A |
Printer Model | Slicer | Print Speed [mm/s] | Layer Height [mm] | Nozzle Temperature [°C] | Heated Bed Temperature [°C] | Nozzle Size [mm] | Adhesion Type | Retraction Distance [mm] | Retraction Speed [mm/s] |
---|---|---|---|---|---|---|---|---|---|
Generic Repetier | Cura | 70 | 0.15 | 210 | 55 | 0.4 | None | N/A | N/A |
Printer Model | Slicer | Print Speed [mm/s] | Layer Height [mm] | Nozzle Temperature [°C] | Heated Bed Temperature [°C] | Nozzle Size [mm] | Adhesion Type | Retraction Distance [mm] | Retraction Speed [mm/s] |
---|---|---|---|---|---|---|---|---|---|
Ultimaker 2+ | Simplify 3D | 40 | 0.1 | 220 | 60 | 0.5 | None | N/A | N/A |
Printer Model | Slicer | Print Speed [mm/s] | Layer Height [mm] | Nozzle Temperature [°C] | Heated Bed Temperature [°C] | Nozzle Size [mm] | Adhesion Type | Retraction Distance [mm] | Retraction Speed [mm/s] |
---|---|---|---|---|---|---|---|---|---|
Generic RepRap | Slic3r | 60 | 0.3 | 195 | 60 | 0.4 | HairSpray | N/A | N/A |
Printer Model | Slicer | Print Speed [mm/s] | Layer Height [mm] | Nozzle Temperature [°C] | Heated Bed Temperature [°C] | Nozzle Size [mm] | Adhesion Type | Retraction Distance [mm] | Retraction Speed [mm/s] |
---|---|---|---|---|---|---|---|---|---|
Generic Repetier | Cura | 40 | 0.05 | 200 | N/A | 0.4 | BlueTape | 2 | 70 |