We introduce trends for filaments based on data we have collected.We are excited to give these insights monthly.
Helios Support is a “high heat” water-soluble PVA material which is engineered as support material for dual extrusion 3D printing in combination with engineering materials which require to be printed at higher temperatures and/or in heated build chambers.
Any good story of the sea comes with a bit of embellishment, but this material needs not embellishing. Our 2nd material, following Galactic Empire Metallic Purple, designed in collaboration with local artist, Rose "Maz" Moore of the creative duo "Maz and Attero"
Shout out to Fillamentum for creating the popular Vertigo Grey. Also at the top of their craft, we appreciate other folks who make good stuff. After all, a little healthy competition with some banter and encouragement makes for good fun! Inspired by both popular filament and film culture, we present to you Empire Strikes Metallic Black HTPLA.
REFILL is a non-spool cartridge compatible with the reusable spool MASTERSPOOL standard, which anyone can print by themselves using the RichRap’s free and all-available project. This solution is more ecological and slightly cheaper in comparison to the filaments offered on disposable spools. Fiberlogy is one of the first few companies in the world that has decided to add the solution to its range.
A proprietary bio additive Polyethylene Terephthalate Glycol Modified (PETG) filament provides the resilience of Acrylonitrile Butadiene Styrene (ABS) with some features of Polylactic Acid (PLA) material allowing for a better print from your 3D printer.
ASA – short for acrylonitrile styrene acrylate – features many of the same properties as our ABS 3D printer filament – including high strength and little/no warp – but with the added benefit of UV resistance – which means that your prints will be unaffected by weather – especially hot sun – and the outside environment in general.
Make your prints truly unique. As from today we are offering Color on Demand to all our users. With Color on Demand you can request a RAL reference which will be matched in PLA by colorFabb’s team. With an MOQ of 2kg, the threshold is lower than ever for 3D printing users to create with their very own color!
RAL 9003
RAL 9017
RAL 9005
RAL 5015
RAL 3020
RAL 5002
RAL 6018
RAL 2008
RAL 1023
RAL 9006
11-0602 TPX
2272 C
877 C
2145 C
485 C
802 C
Black C
186 C
Cool Gray 11 C
871 C
Previous Months
